Micromedics logo
Micromedics Home PagePlace an OrderProducts and ServicesAbout MicromedicsCustomer ServiceContact Micromedics
 


Products and Services
> Ear, Nose, and Throat

DeVilbiss Atomizers, Nebulizers, Powder Blowers and Irrigation Syringe

Syringe – Model 177
 
Powder Blower – Model 119

Syringe – Model 177

  • Small, malleable tube permits deep, yet painless introduction into external ear canal
  • Regulate flow by placing finger over small hole in head of instrument; if air pressure is 20 psi or under, stream will stop when finger is removed
  • Can be operated by the No. 630 cutoff assembly or a No. 1 bulb
 

Powder Blower – Model 119

  • Ideal for applying an even diffusion of any powder to nose, throat, ear, tooth sockets, body orifice, and surfaces
  • Curved spray tube for ease and convenience of applications
     
Powder Blower – Model 175
 
Nebulizer – Model 180

Powder Blower – Model 175

  • Used for even diffusion to the ear, nose, throat and any other body cavities
  • Operated by the DeVilbiss 630 cutoff assembly or a No. 1 bulb
 

Nebulizer – Model 180

  • Practical nebulizer for use where vapor instead of spray is indicated for treatment of sensitive nasal cases
  • Specially suited for solutions with oil or glycerine-base mediactions
  • Good for deep-seated conditions of lower respiratory tract or very sensitive nasal tract
  • Vented nasal guard restricts development of undesirable pressure; small and large plain guard are provided for inflation purposes
     
Atomizer - Model 286
 
Atomizer – Model 163

 

Atomizer - Model 286

  • Ultra-fine particle atomization of most medical solutions
  • Straight flow tip is easily disassembled for cleaning
  • Suitable for applying fine, medicated spray to nasal and oral cavities, or oral vaccines
  • May be used with compressed air, the No.1 bulb or Model 630 bleeder-type cut-off
 

Atomizer – Model 163

  • Designed for quick change and replacement of spray tube
  • Tight fitting “O” ring ensures consistent spray
  • Metal spray tube may be sterilized after each use
  • Adjustable tip permits up or down spray for aqueous solutions of heavier viscosity
     
Atomizer – Model 151

 

 
Atomizer – Model 15

Atomizer – Model 151

  • Precise control and application of topical anesthetics
  • Produces fine mist without force
  • Vacuum type atomizer that can be operated by one of the following: compressed air, No.1 hand bulb or the No. 630 cut-off assembly
 

Atomizer – Model 15

  • Metal atomizer with adjustable tip for directing spray up or down to reach inaccessible areas of the throat
  • Can be used with **RhinoGuard™ or reusable nasal guard
  • Used for nose and throat treatment -hand bulb
  • Most types of oil or water solutions can be used that are compatible with rhodium plating

**Use convenient, single-use RhinoGuard™ Tip Covers on your DeVilbiss products to reduce crosscontamination, increase comfort for your patients and eliminate the need to decontaminate products over and over.

Also Available: DV-13-RD Plastisol Bulb, DV-1-RD Plastisol Bulb, DV-630 Bleed-Type cut off with tubing, DV-8200-D

View other products: